PROTABS

Crystal clear, turbidity-free water
with the latest generation of green technology!

LIQUITECH FOM offers new solution potentials in water technologies:

Removal of sediments and turbids out of clear water systems and circuits.

Heavy metals such as lead, copper, zinc, mercury, iron and manganese are oxidated and filtered out.

Under certain circumstances, even toxic aromatic and aliphatic contaminants such as phenols, pesticides, solutants, diluents, alcohols, oils etc. can be decomposed and filtered out.

Examples of use:

Own Wells, cisterns	Cooling towers, cooling and air conditioning systems	Fountains, water features
Wastewater, Sewage	Surface Technology, rinsing and soaking baths	Private Pools

Your application is not listed? Ask us - we'll certainly find a solution for you, too!

Oxidative Water Treatment (AOP, advanced oxidation processes)

Protabs Disinfection without toxic substances, residues and by-products

PROTABS OXY release so-called Hydroxyl Radicals (OH-groups), whose strongly oxidizing effect eliminates all sorts of bacteria, legionella, algae, amoeba, fungi, protozoa and other microorganisms. PROTABS OXY with their high oxidation potential of 2.8V have a much stronger effect than most common biocides such as chlorine (1.4V), chlorine dioxide (1.5V) hydrogen peroxide (1.8V) and even ozone (2.1V). Other than almost every other biocide, PROTABS OXY leave no disinfection by-products (DBP), and have much lower corrosive side-effects on metals, plastics and sealings.

PROTABS OXY are not subject to specific labelling obligations, neutral in handling and non-toxic!

Organic and inorganic substances are converted into solids and filtered.

Removal of solids and turbidity by active fine filtration

LIQUITECH FOM is a highly porous permanent filter granulate with an active AOP-coating, which acts oxidizing and catalytic with all substances entrained in the water.
AOP means that even solutes such as the heavy metals lead, copper and zinc, as well as iron, manganese, arsenic, etc. are converted into solids. In addition, all microorganisms such as bacteria, algae and fungi, are eliminated by the strong oxidizing effect of the surface coating. With a filtration fineness of 2-3 microns (compared to about 50 microns with filter sand), these impurities are filtered as well as all other suspended matter, and very high filtration rates of 95-99% are achieved over the entire pH range.

The oxidizing effect of the material is refreshed in each backwashing by adding PROTABS OXY in the rinse water, thus remaining unspoiled throughout the whole service life of the filter granulate.